Author: Mark Weller

The front door contributes greatly to the impression made on visitors to a period house.  Appearances were important, even if the decoration within were modest. Front door designs varied from period to period: Georgian through Victorian, Edwardian/Federation and Inter-War.

The key features of the front door, even though they differ in detail between the different periods, are as follows:

• The door was usually of timber construction, with various arrangements of timber or glazed panels. These panels were recessed relative to the frame and were surrounded with a decorative timber moulding. Victorian era doors typically also had timber mouldings on the inset panels, rather like the back of a cricket bat.
• Door furniture included handles, locks, knockers, letter-slots and finger-plates.
• Many doors had a window above the door (known as a “fanlight”) and often had windows beside the door (“sidelights”). The fanlight could usually be opened for ventilation.

Attention to detail in this area is relatively straightforward to research and helps greatly in achieving an authentic outcome.

Victorian houses typically divided the wall decoration into three zones, at least in the main rooms:

• The FRIEZE, immediately beneath the cornice and about 300mm – 450mm wide.
• The DADO, between the skirting board and chair rail or dado line, about 900mm high.
• The BODY, between the dado and frieze.

The Dado was usually painted, wallpapered or stencilled in different colours to the Body of the wall above. The frieze was wallpapered or stencilled.

The trend for use of fluorescent and LED globes for lighting is beneficial in terms of greatly reduced power consumption and lower emitted heat. These globes can be fitted to many period light fittings, table lamps and standard lamps without difficulty.

However, many light fittings and lamps have globes that are visible, so it is important to avoid using globes that are of an inappropriate size or shape (eg a coiled fluorescent globe or a frosted LED candle globe: these are certainly fine for use under a shade or in an opaque glass, but not where they can be seen).

At this stage, too, the full range of LED globe shapes, sizes, bases and wattages is not yet available in Australia. This is gradually improving.

One further issue concerns lights fitted with dimmer switches, as only larger LED globes can be dimmed. Check with the supplier before buying any LED for a light with a dimmer switch.